Skip to main content
Click To Continue If your Vizio TV won’t turn on, work through these fixes in order. Most cases resolve within the first few steps.

​
Quick fixes

1

Check the power cord

Unplug and firmly reconnect the cord at both the TV and outlet. Inspect for damage.
2

Test the outlet

Plug another device into the same outlet. Bypass surge protectors and power strips.
3

Check the standby LED

A solid LED means power is reaching the TV. No LED means a power source problem. A blinking LED signals an error code (note the pattern).
4

Test the remote

Replace batteries. Try the physical power button on the TV. If the TV button works, the remote is at fault.
5

60-second power cycle

Unplug the TV, wait 60 seconds, hold the TV’s Power button for 30 seconds to drain capacitors, then plug back in.
6

Hard reset via TV buttons

Hold Volume Down + Input on the TV for 10-15 seconds until an on-screen prompt appears.

​
Common causes

Likely a failing power board or capacitor. Consider warranty or professional repair.
Check ventilation (4+ inches on all sides), clean dust from vents, retry the power cycle.
Check your surge protector’s reset button. Surge damage may require repair. Check warranty and insurance.
Unplug all HDMI/USB devices, then power on. Reconnect one at a time to isolate.

​
When to contact support

If none of the above works, listen for clicking, buzzing, or a burning smell. These indicate internal hardware failure. Contact Vizio support with your model and serial number.
Independent guide, not affiliated with Vizio, Inc. For official support: support.vizio.com.